A mounting system for carrying the knife on your belt, on a MOLLE panel or hanging from a dangler.
Last few
AFSHMT - Sheath adapter
Everyone carries a knife in their own way. The sheath adapter has a round base that screws onto the sheath and accommodates three modules: a belt clip, a MOLLE attachment, or a dangler.
The base has a 24-position rosette, so the knife can be positioned vertically or at 15° increments. The belt clip is available for 38, 45, and 50 mm belts and can be attached without removing the belt. The MOLLE module has two tabs for two rows of PALS webbing, and the dangler allows the knife to swing from the leg.
It uses only standard M5 screws and steel pins, and is also compatible with the paracord spool. 3D-printed in the workshop using PETG.
Specs
- Base: Ø48 × 7 mm, holes spaced 19 mm apart
- Modules: belt clip 38/45/50 mm, MOLLE, dangler 48 × 96 mm
- Tilt: 24 positions, in 15° increments
- Weight: base 10 g; modules 22–43 g
- Material: 3D-printed PETG; M5 screws and steel pins
- Designed and manufactured in Portugal
Care
Check the tightness of the center screw from time to time. Do not leave it in the car in direct sunlight.
You might also like
A small round screw-top container with a seal, for carrying wax or cream in your pocket.
AFTIN - Leather care cream box
from €3.75In stock
A screw-top tube with a seal to keep the matches dry, with a striker inside the cap.
AFMATCH - Match tube
€5.00Last few
Sheaths
AFDGL1 - Dangler
€7.50In stock
Carry your flashlight on your belt, held by Velcro and ready to go.