A screw-top tube with a seal to keep the matches dry, with a striker inside the
Last few
AFMATCH - Match Tube
Wet matches won't light. This tube holds matches up to 70 mm long behind a screw-on cap with an O-ring, and the cap rests against a stop to prevent it from being tightened too much.
Inside the cap is a recess for a striker strip, which stays dry at all times, and at the bottom there’s space for a sandpaper disc. The top features the AF logo engraved on it.
There is a version with a side tab that screws onto the sheath using the same mounting holes as the AF Knifeworks Fire Starter Holder, and it has a hole for a lanyard. 3D-printed in-house using PETG
Specs
- Dimensions: Ø36 × 81.4 mm (body Ø30)
- Interior: Ø24.6 × 76 mm (matches up to 70 mm)
- Weight: ~31 g (~35 g with tab)
- Material: 3D-printed PETG; NBR rubber O-ring
- Includes: scratch strip on the cap
- Option: tab for the sheath (left or right)
- Designed and manufactured in Portugal
Care
Keep the thread and O-ring clean; a thin layer of silicone grease helps create a seal. Replace the scraper strip when it wears out.
You might also like
A small round screw-top container with a seal, for carrying wax or cream in your
AFTIN - Leather Care Cream Box
from €3.75In stock
Sheaths
AFDGL1 - Dangler
€7.50In stock
A mounting system for carrying the knife on your belt, on a MOLLE panel, or susp
AFSHMT - Sleeve Adapter
from €8.00In stock
It carries the flashlight on his belt, secured with Velcro, and is ready to go.